4-axis motorized stage with translation and rotation function.
Travel range of x, y, z axis stage is 150mm.
Travel range of rotation stage is 360 degrees.
NEMA 17 stepper motor drive and RS232 interface.
Zero position switch and Limit switch.
Hand wheel for manual drive.
The 4-axis motorized stage is combined by three motorized linear stages and one motorized rotation stage. It provides four degrees of freedom adjustment. By using our motion controller, customer can control the stage automatically.
We can assemble all kinds of multi-axis stage according to customer requirement. Please contact us if you have other special requirement on the multi-axis stage. We will provide suitable solution for you.
The xyz stage can also be stacked by MOX-05-200, MOX-05-300 or MOX-05-400. Please click the model number to get more information.
Travel Range xyz Translation Stage: 150mm
Rotation Stage: 360 degrees
Platform Diameter 100mm
Aperture Diameter 30mm
xyz Translation Stage Screw Pitch 4mm
Rotation Stage Transmission Ratio 180:1
Resolution (8 Subdivision) xyz Translation Stage: 0.001.25mm
Rotation stage: 0.00125 degrees
Maximum Speed xyz Translation Stage: 20mm/sec
Rotation stage: 25 degrees/sec
Repeatability xyz Translation Stage: <0.005mm
Rotation stage: <0.005 degrees
Motor Type xyz Translation Stage: NEMA17 Stepper Motor (0.9 degrees)
Rotation stage: NEMA17 Stepper Motor (1.8 degrees)
Maximum Static Torque 0.4Nm
Rated Current 1.7A
Rotation Stage Zero Position Built-in
Center Load Capacity 15kg